Latest in the wheel saga

Went to collect wheels a day later than planned and there was already some evidence of corrosion (black patches). Mea Culpa; should have got them to prime them after all. Phil explained the necessity of primer for protection, within half an hour of blasting. The situation was saved by the fact that some of the wheels still had unremoved crud on them, which had been overlooked and Phil said he'd re-do them.

Then we started talking about paint and got on to how he has spray facilities there. He showed me some work they are spraying now: benches, etc., and he'd previously showed me the finish he'd got priming wheels and the finished surface of a gantry. All pretty good stuff.

I explained that the reason I had wanted to do priming and painting myself was not money saving, but because they are going to need some hammering around the rims, where they are dented. So he suggested I take them away, do the hammering and, when happy, bring them back and he will blast them again, prime them and paint them for me for £20 a wheel. It isn't two pack (but it'll be £100 cheaper. £30/wheel to two-pack would have been possible if I'd first blasted them: that's £40/wheel x 5= 200, as against £100). They won't be concours, but I reckon he will get a pretty good result and save me some hassle, as long as he does a proper job of getting the rest of the crud off.

They will be semi-gloss black....ready for tyres. I reckon that is a result.

Right, I need to get on with rim bashing.

Wheels

Delivered the wheels to P&P and asked them to just blast them. I'll prime and paint them myself. Warned off Hammerite and advised to use spray-on etch primer.

He showed me some wheels which they had finished. They looked excellent but of course I have no idea what they looked like before they were done.

The wheels will be ready tomorrow afternoon, same time. Fast turn-around.

Decided about wheels

Right, been thinking about wheels and decided to paint them myself and save the £150-200 that a professional job would have cost me towards the tyres. As a friend said, I am not aiming for concours condition here. Also, if they do get a bit chipped when tyres go on, touching up will be no big deal. I might get P&P to not prime the brake side of the wheel, and I'll hammerite it instead, as that side gets lots of crud and wet thrown up from the road.

Shotblasted Wheels

Blimey! No more buggering around with abrasives, dust, frustration....and not quite getting the results I want either! I just talked to the guy at P&P Services and they will blast each wheel for £10 and prime for £5....total for 5 wheels = £75. And they will turn them round in about three days. I'll take them up on Monday.

Then I need to decide whether to get Brian to two-pack them for £150-200 or spray them myself, a la Practical Classics. There's a lot to be said for the professional job, but right now I need to slow down on the money-spending, especially as I now need to get a new sender unit; and tank repair kit, which will set me back £45 plus postage.

Fuel tank next to exhaust

Last night I started stripping the fuel tank I got from Magpie (because mine had horrible holes in it) and the paint and crud is coming off nicely. I got to thinking about where it is positioned on the van. Friends say I am overly safety conscious, but does nobody else think that positioning the opening of the exhaust right under the extension tube to the fuel tank filler tube was asking for trouble?

In practice, vans had extension tubes which cleared the van sides, so that rather than pouring exhaust under the chassis, it came out the nearside, slightly to the rear of the filler, but all the same, right near any fuel drips.

Valance

I answered the door early this morning, bleary-eyed, to see an exciting package on the doorstep: my valance! I've been looking forward to this. I ordered it a few weeks ago from my metal guru, Iain Mckenzie and he has done a grand job of it, as you can see.

The valance at the top is the original, bent beyond sensible repair and hardly worth the effort (take it from someone who's tried) when you can have a beautiful replacement like mine for £45 - with curves in all the right places and made from virgin metal! It came with a top panel (£8) which is the part on which the horn is mounted.

Thanks Iain!

Wheels and Tyres

Here is a very poor quality film (from my phone) of the old tyres being removed from the wheels at X-Spurt Tyres in Hervey Street, Ipswich. The guy said it was ok to put him on my blog because he is online in several different places, which boggles the mind. He was helpful on the subject of wheel painting. He says that with their technology, there is no reason why the rims should get chipped, as I feared, when the tyres are put on. His mate also said that they'd clean up the rims for free when they put tyres on, so I reckon I'll be going back

That said, I also went over to see Brian at B&M Car Body Centre to sound him out on the cost of 2-packing the wheels and he reckons if I can get them prepped he may be able to get the price down to thirty quid a wheel. For prepping, X-Spurt recommended a bead blaster and Brian mentioned a guy whose opeation is at Sheep Drift farm: P&P Blasting Services. I went along but they were not in. I did wonder if I'd be too small fish for him , as some of the plant standing in his yard was huge (what looked like a classic crane and a sewerage pipe....all cleaned up nicely).

I might not need X-Spurt to do the rims, but they removed tyres from all five wheels for a tenner.

So thanks, guys. I hope to be coming back to get tyres when the wheels are ready

I started cleaning the wheels up last week and without a shot blaster they take a heck of a long time and the result isn't fantastic. I read an article in Practical Classics about doing the wheels yourself with primer and spray paint, but I bet they didn't start out with wheels like these. If I get them blasted and if that costs a lot, I might possibly go for the DIY option on painting.