Austin 101 Restoration: fabricating sides

Thursday, 27 March 2008

fabricating sides

Having made the shoulder pieces, one of which I adjusted and adjusted and finally scrapped (!) ,

I made the sides, one with a particularly nice bottom.

Some of the bends caused mild distortions which needed adjusting with stretcher and shrinker

The bottom of the "side" formed around the tap

Lots of welding and trimming needed but the essential shape is there.

Tomorrow I need to finish the other side, then I need to position and weld in captive nuts - for setting the radiator securely in the radiator stand.

No comments:

Post a Comment

The more astute among you will have noticed that my 101 images actually have the Morris JB front panel. My 101 came with a JB panel and evidence of accident damage, so presumably, as fewer 101 panels were ever in circulation, a JB panel was used as a replacement?

The Austin 101 was a badge-engineered Morris JB, which in turn was a J Type van with an OHV B Series engine and 4 speed gearbox, in place of the sidevalve and 3 speed of the original J.

I now have both the JB panel and an ex-stock 101 one which I bought from a fellow restorer.

Blog Aliases

I agree an alias with anybody I refer to on my blog because I decided to give myself my alias, Tinworm, after attracting the atttentions of a very unpleasant stalker last year. I'd like to be able to call people by their real names, but I really advise against anyone using them online these days. Seems such a shame, not least of all because there are so many I'd like to be able to thank here. Real names (with one notable exception) have been used only with agreement with their owners.

Since writing the above I have bought a microlight which is registered with the CAA, which publishes the register online....making my anonymity impossible to keep. So increasingly I will be less guarded, but I will continue to respect the aliases of others.